Aluminum & Alloy Rod Continuous Casting and Rolling Line

Detailed Product Description:

Place of Origin: Sichuan China (Mainland)

Adopt advance continuous casting and rolling technology to produce special electrician used aluminum, alloy aluminum ingot.

UL+Z-1500+255/14 Aluminum & Alloy Rod Continuous Casting and Rolling Line

Technical Data

Melting furnace	Type	shaft furnace
	Melting rate	5 t/h
Holding furnace	Type	hydraulic tilting-type
	Capacity	2×9 t
Filter & degassing device	Treatment gas	nitrogen or argon
	Treatment capacity	30-100 kg/min
	Degassing efficiency	50-70
	Container capacity	440 kg
Casting machine	Casting ring dia.	1500 mm
	Casting bar speed	8 - 12 m/min
	Casting bar section	2300 mm2
	Water consumption	90 m3/h
	Motor for casting ring	4 kW
Accessory shearer	Max. shearing force	14000 Kg
	Max. shearing stroke	85 mm
Straightening machine	No. of straightening roller	5
	Pulling motor	3 kW
Induction heaterType	Output frequency	350 Hz
	Output power	300 Kw
	Water consumption	15 m3/h
Rolling mill	2-high mould in rough rolling stand
	3-high mould in final rolling stand

	Outlet rod dia.	9.5 mm
	No. of rolling stand	14 pcs
	Rollers' dia.	255 mm
	Finished rolling speed	4 - 6 m/s
	Production capacity	2.6 - 4 t/h
	Center height	1052.5 mm
	Main motor	355 kW
	Emulsion consumption	60 m3/h
Rod quenching device	Rod quenching tunnel	8 pcs
	Outlet rod temperature	< 100
	Water consumption	60 m3/h
	pulling speed	6.94 m/s
	pulling motor	7.5 kW
Twin-coiler	Coil's size	φ1500×φ2300 mm
	Laying head motor	4 kW
	Collecting basket		φ2300×1300 mm
	Coilsweight		1500-1800 kg

4.Line Composition

It is composed of melting shaft furnace, (tilted) holding furnace, filter & degassing unit, casting machine, accessory oil-hydraulic shearer, cast bar straightening machine, induction heater, rolling mill, engine oil lubrication system,emulsion lubrication system, rod quenching device, twin-coiler, line electric control, etc.

Aluminum & Alloy Rod Continuous Casting and Rolling Line

Related Products