1. Foil Material:

Fully Soft (0 temper) aluminum of alloy grade AA-8011 conforming to Aluminum Association, USA, specification.

2. Thickness Tolerance:

80% of the length will be within 5 %,
20% of the length will be within 8%
Methodology of test : By weighment

3. Foil Temper:

0 (fully annealed)

4. Surface Finish:

One side matt and other side bright finish or both side bright finish.

5. Perforation Count:

6.35 micron :  80 % of lot will be within 100/Sq.meter max

                    20 % of lot will be within 200/Sq.meter max

7 micron      : Within 100 /Sq. Meter max.(Observed values<50 )

9 micron      : Within 100 /Sq. Meter max.(Observed values<50)

12 micron    : Within 50 /Sq. Meter max.(Observed values<50 )

                   Methodology of test : EN 546- 4:1995

6. Stickiness:

Material shall unwind freely at maximum 1.5 Meter length load.

7. Wettability:

When fully annealed wettability index will be 'A' - 'C' as per ASTM B 479 standard.

8. Core material:

Aluminum/Steel

9. Core i.d.:

76mm/152mm

10. Roll o.d.:

600mm maximum on 152 mm core and 450 mm maximum on 76 mm
core or as specified and agreed with customer

11. Roll width:

1480mm maximum or as specified and agreed. Tolerance ? 1 mm.

12. Splicing:

Smooth ultrasonic welding joint for light gauge through out the web having 5mm to7mm overlap. At splice foil will have 80% of parent tensile strength.

13. No. Of splice: 

Average 2 per reel max.

14. Rest on core :

4 mm max

15. Winding quality:

Foil winding on the core will have straight build-up having a maximum interlayer shift of 0.5mm. Maximum telescopic will be 2 mm.

16. Identification:

Each reel is identified with a ticket having Reel No., Specification, Mfg.

17. Packing:

Suspended packing on strong wooden pallets with adequate protection against corrosion or transit damage. Runner clearance 75 mm minimum.

18. Marking:

Order No., Batch No., Gross & Net Wt. and any other details as agreed mutually with customer