The working table drives the work piece by movement forward and backward. The main motor rotates at high speed and drive the cloth wheel. Cloth wheel and profile surface produce the tangential friction. Cloth wheel surface used the polishing wax or flux, thus achieve the aluminum profile surface polishing and sweeping the extrusion lines.

 

2.components: Main motor, Rail, Working table, Dust collector and Electric control box.

 

3.technical parameters:

1) Overall size: 8000*2500*2500mm (L*W*H)

2) Available aluminum profile size: 6000*700*200mm (L*W*H) (Adjustable)

3) Total rail length: 13000mm

4) Polishing wheel Specification: Φ350*600=40 pcs (motor power: 20KW  2 units)

5) Polishing speed: 3-15m/min

6) Dust collector: one set (power:7.5KW, rate: 12000m3/h)

7) Lifting and Down Motor power: 1.5KW (frequency conversion, electromagnetic brake)

8) Main electric appliance: Mitsubishi (frequency transformer, contactor, thermal relay)

9) Automatic wax spraying system: 4 pieces of Germany spraying gun, one unit of 60L pressure drum. 

10) Total power: 46.75KW