Aluminum coil
1. Alloy: 1100, 1145, 1050, 1060, 1070, 3003, 3105, 3005, 3A21, 5052, 5082, 5083, 8011 etc.
2. Temper: H12. H14. H16. H18. H22. H24. H26. H32. H34. H36. H38. O etc.
3. Thicknes: 0.01mm -- 5.0mm
4. Width: Under1600mm
5. Packing: Export standard, covering with brown paper and plastic film then packed with wooden case/pallet
6. Origin: China
7. Lead Time: Within 25 days
8. Productivity: 4000mt/month
9. Payment Terms: T/T, irrevocable L/C at sight
Remarks: Specific requirement of alloy, temper or specification can be discussed at your request.
Application: PP cap stock, hot rolled thick plate, PS base plate, aluminium curtain wall base plate, the traffic sign, air-conditioner heat and exchangers, food container, household foil, Pharmaceutical packing, cigarettes packing.
| Aluminium Coil | |||||||||||||
| Application | |||||||||||||
| Aluminium Coil, non-alloy and alloy products have many different applications, they are used windly throughout construction, building, decoration, lighting, metal nameplate, aircraft and aerospace structures, etc. | |||||||||||||
| Specification | |||||||||||||
| ALLOY | TEMPER |
THICKNESS (mm) |
WIDTH(mm) | LENGTH(mm) | |||||||||
|
1050,1060,1070, 1100,1235,1200, 2024,3003,3005, 3105,3004,5052, 5005,6061,6063, 7075,8011,8006, |
O,F, H12, 114,H18,H22, H24,H26,H32, H34,H36,H111, H112,H314,T6, T651, |
0.2—8.0 | 700--1500mm | in Coil | |||||||||
| chemical composition | |||||||||||||
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ca | V | Ti | Other | Min.Al |
| 1050 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.50 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.60 |
| 1070 | 0.20 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | - | 0.05 | 0.03 | 0.03 | 99.70 |
| 1100 | 0.95 | 0.05-0.2 | 0.05 | - | - | - | 0.10 | - | - | - | 0.05 | 99.00 | |
| 3003 | 0.60 | 0.70 | 0.5-0.2 | 1.0-1.5 | - | - | - | 0.10 | - | - | - | 0.15 | 96.95-96.75 |
| 3004 | 0.30 | 0.70 | 0.25 | 1.0-1.5 | 0.8-1.3 | - | - | 0.25 | - | - | - | 0.15 | 96.55-95.55 |
| Mechanical Property | |||||||||||||
| Alloy | Temper | Thickness | U.T.S(MPa) | Elongation (≥%) | |||||||||
| 1100 | O | >0.20-0.30 | 75-105 | 15 | |||||||||
| >0.30-0.50 | 17 | ||||||||||||
| >0.50-1.50 | 22 | ||||||||||||
| >1.50-6.00 | 30 | ||||||||||||
| H12 | >0.20-0.50 | 95-130 | 3 | ||||||||||
| >0.50-1.50 | 5 | ||||||||||||
| >1.50-6.00 | 8 | ||||||||||||
| 1060 | O | >0.20-0.30 | 60-100 | 15 | |||||||||
| >0.30-0.50 | 18 | ||||||||||||
| >0.50-1.50 | 23 | ||||||||||||
| >1.50-6.00 | 25 | ||||||||||||
| H12 | >0.50-1.50 | 80-120 | 6 | ||||||||||
| >1.50-6.00 | 12 |
豫公网安备41010502003434号