Our aluminum mechanical polishing machine is the machine used the cloth wheels in high rotation speed to remove the natural oxide film, eliminate the extrusion lines or marks and other surface damage. After processed by mechanical polishing, aluminium profiles surface will be smooth and bright like as a mirror. We also call it as mechanical mirror finish surface treatment. If it is equipped with different kinds of chemical treatment such as anodizing, coloring or acid lightening, the aluminium profiles surface will be bright, shining, smooth and nice luster, upscale and beauty.

 

Our aluminum mechnical polishing machine not only can process the simple and common building and architecture aluminum extrusion profiles, but also can process different variety of complicated cross sectional profiles ( such like flat, incline, arc face, tube, with grooves noodles) for furniture, bathroom, bags, home appliance, aluminium tile trim, wooden floor trim, stairs edge trim, door edge trim and other profiles.

 

Our aluminum mechnical polishing machine is not only can polish and buff the thick profiles, but also can polishand buff the very thin profiles like 0.2mm.

 

1.Working principle of aluminum mechnical polishing machine:

The working table drives the work piece by movement forward and backward. The main motor rotates at high speed and drive the cloth wheel. Cloth wheel and profile surface produce the tangential friction. Cloth wheel surface used the polishing wax or flux, thus achieve the aluminum profile surface polishing and sweeping the extrusion lines.

 

2.Components of aluminum polishing machine: The main machine, Rail, Working table, Dust collector, and Electric control box.

 

3.Technical data of aluminum polishing machine

1) Overall size: 8000×2500×2500mm (L×W×H)

2) Available aluminum profile size: 6000×700×200mm (L×W×H)

3) Total rail length: 13000mm

4) Polishing wheel motor power: 20KW      2 units

5) Polishing speed: 3-15m/min

6) Dust collector device: one set (power:7.5KW, air blowing rate: 12000㎡/h)

7) Running motor: 1.5KW  (frequency conversion, electromagnetic brake)

8) Main electric appliance: Mitsubishi  (frequency transformer,  contactor, thermal relay)

9) Automatic wax spraying system: 4 pieces of Germany spraying gun, one unit of 60L pressure barrel.

10) Total power: 46.75KW.