PRECISION STRAIGHTENER(0.1mm-1.4mm)
|
Width Max.mm |
Length Max.mm |
Line Speed (m/min) |
Work Rolls |
Back Rolls |
Motor (HP) |
|
200 |
0.1-1.4 |
5.0-30 |
UpperΦ12mm*11 LowerΦ12mm*11 |
Each group and roller |
2 |
|
Standard Accessories： 1、Inverter 2、StraightenRollers Universal Pick The Driver 3、Four FenLi Trimming Device 4、Working Rollers Each Set Back Pressure Roller 5、For SUJ2 Solid Material Trolley |
|||||
|
Features
2、 Roller bearing steel material SUJ2 (in), the heat HRC60 quenching hard chromium plating again after º abrasive wear long life, high hardness
4、Use 22 paths and straighten rollers, working rollers add back pressure roller, reaction in precision machining power in abundance. Eliminate stress, the remaining material realized the flatness high yuan
|
Features:
1.22 smaller diameter work rolls remove the coil set from the material and ensure the high level material that precision processing demands.
2.The upper work rollers adop 4 point fine micro adjusters with reading 0.01mm advance reference indicators ,High quauilty and precicion.
3.All rolls are made of bearing steel(SUJ2),have all been quenched ,hard-chrome plated and ground with min.HRC60°.
4.The transmission device uses the gimbal connection，Through frequency changer control speed，Strightening leveling speed and punch press synchronization，Achieves the limitless speed change steady feeding effect。
5.Addition intermittence type butter self-lubrication installment。
6.Campatible with other feeders.
豫公网安备41010502003434号