一、Belt structure
the belt base fabric uses 1-2MM strong pulling force  PVC to manage the conveyor belt is the baseband, the surface layer melt pastes the 0.8MM-1.8MM thick wear-resistant polyester felt. The one-sided felt thickness is 1.6MM-3.8MM, two-sided felt thickness are 2.5MM-5MM

二、Tensile strength

In 0.5% elongated situation, the belt normal work withstanding pulling force 10KG/CM belt width. Maximum withstand pulling force is 20KG/CM belt width. 

三、Minimum turning diameter

The positive rotation minimum diameter: 40MM-60MM, the reverse rotation minimum Diameter: 60MM-80MM; For example, the joint of steel buckle minimum diameter is 80MM.

四、Highest heat resistance,

the highest load bearing 100 degrees, working conditions temperature -10℃-80℃

五、Joint approach

  Usually is dissolve the teeth shape attachment, may also can use SKIVED or stainless steel belt buckles attachment.

六、Chemical resistance

Bears the common weak acid and alkali, bears common chemical reagent

七、Application

 Mainly suitable for the copper clad laminate, automobile steel plates, the refrigerator shell, the papermaking, the glass and so on must the protective coating the object transportation.