Hesheng brand
LED for aluminum
Type: FQ - 35, FQ - 42, FQ - 33, FQ - 30, FQ - 17, 42C - all outdoor pulsaling FQ D18 light-box profiles, FQ -
Specification: 90.2 35.3 * (FQ - 35) reviewed 90.3 * 43.5 (FQ - 42) 96.5 * 32.5 (FQ - 33) 75.8 * (FQ - 30) 50 * 17 (FQ - 17) 90 * 41 (FQ 42C - 18 (FQ) 50 * D18-6 meters long all) for a root
Material: 6063A - T5
Surface treatment: electrophoresis, anodic oxidation, electrostatic powder spraying (regular black and white) quantity can other toning production according to customer's requirement
Applicable scope: indoor and outdoor LED single, double colors bar screen, all kinds of LED the box
Supporting plastic rotation Angle
According to the customer request can be separately designed, open mode, processing, manufacturing
Currently with 6063 6061 aluminum for common:
The distinction with 6061 6063:
The relative 6061 6063 soft. 6061 in require a certain intensity, weldability and corrosion resistance of various industrial structural high,
If making trucks, tower building, and precision machining etc. Use tubes, rods, shape, the plank. In building material, 6063 irrigation
Pipes and for vehicles, bench, furniture, fencing etc. With the extrusion materials,
6063Aalloy features:
After heat treatment craft production pre-stretched aluminum alloy, the high quality, the characteristics of magnesium alloys of silicon, has the processing function
Excellent, good welding characteristics and electroplating, good corrosion resistance and toughness and processing after materials
Dense without defect and easy polishing, coloring film easy, excellent oxidation such good features, Representative USES include space solid
Fixed device, electrical fixtures, communications, also widely used in automation machinery parts, precision processing, mould
Manufacturing, electronics and precision instruments, SMT, PC board solder vehicles etc ~ ~ is LED aluminum preferred brands.
T5 and T6 status difference:
T5: by high temperature and cooling, the forming process of artificial aging, suitable for high temperature molding process, after cooling
After processing (can undertake straightening, flatten, but does not affect the mechanical properties of artificial aging products shall limit).
After introducing T6: quenching heat artificial aging, suitable for high temperature molding process after cooling without processing,
(can undertake straightening, flatten, but does not affect the mechanical properties of the product. Limit)
So the product 6063A - the most relevant temperature T5 mechanical properties of aluminum, LED to manufacture extrusion press statement is below the ingredients
Contact: Mr. Du
Mobile phones: 13713539335
Power word: 0755-84717278-86
Preach true: 0755-27342358-86
QQ: 765740583, 1553988278, 1197466023
E-mail: xddfl@live.com
Mobile phones: 13713539335
To address: baoan district, shenzhen fuyong town industrial avenue hesheng aluminium mail: 518103
Page: http://hu530524886.cn.alibaba.com/ company
|
铝型材化学成份(General Chemical Composition of Alloy) |
|
||||||||||||
|
化学元素 合金牌号/ALLOY |
6063(%) |
6063A(%) |
6061(%) |
|
|||||||||
|
|
|||||||||||||
|
硅Silicon Si |
0.20～0.60 |
0.3～0.60 |
0.48～0.80 |
|
|||||||||
|
铁lron Fe |
≤0.35 |
0.15～0.35 |
≤0.70 |
|
|||||||||
|
铜Copper CU |
≤0.10 |
≤0.10 |
0.15～0.40 |
|
|||||||||
|
锰Manganese Mn |
≤0.10 |
≤0.15 |
≤0.15 |
|
|||||||||
|
镁Magnesium Mg |
0.45～0.90 |
0.60～0.90 |
0.80～1.20 |
|
|||||||||
|
铬Chromium Cr |
≤0.10 |
≤0.05 |
0.04～0.35 |
|
|||||||||
|
锌Zine Ti |
≤0.10 |
≤0.15 |
≤0.25 |
|
|||||||||
|
钛Titanium Ti |
≤0.10 |
≤0.10 |
≤0.15 |
|
|||||||||
|
其他单个Other（each） |
≤0.05 |
≤0.05 |
≤0.05 |
|
|||||||||
|
其他全部Others（total） |
≤0.15 |
≤0.15 |
≤0.15 |
|
|||||||||
|
铝Aluminium Al |
余量Remainder |
余量Remainder |
余量Remainder |
|
|||||||||
|
铝型材室温力学性能（Mechanical Properties of Sections Under Room Temperature |
|||||||||||||
|
合金牌号/ALLOY |
状态/State |
壁厚/mm |
拉伸实验(Tensile strength test) |
硬度实验(Hardness test) |
|||||||||
|
抗拉强度Tensile strength Rm/Mpa |
规定非比例延伸强度Non-proportional Stretching Stress |
断后伸长率Stretching rate |
实样厚度Pattern thickness |
维氏 |
韦氏 |
||||||||
|
Rp0.2/Mpa |
% |
mm |
HV |
HW |
|||||||||
|
不小于(No less than)(≥） |
|||||||||||||
|
6061 |
T4 |
所有 |
180 |
110 |
16 |
— |
— |
— |
|||||
|
T6 |
所有 |
265 |
245 |
8 |
— |
— |
— |
||||||
|
6063 |
T5 |
所有 |
160 |
110 |
8 |
0.8 |
58 |
8 |
|||||
|
T6 |
所有 |
205 |
180 |
8 |
— |
— |
— |
||||||
|
6063A |
T5 |
≤10 |
200 |
160 |
5 |
0.8 |
65 |
10 |
|||||
|
﹥10 |
190 |
150 |
5 |
0.8 |
65 |
10 |
|||||||
|
T6 |
≤10 |
230 |
190 |
5 |
— |
— |
— |
||||||
|
﹥10 |
220 |
180 |
4 |
— |
— |
— |
|||||||
|
|
豫公网安备41010502003434号