Aluminum honeycomb panel is a novel, high-tech building and furnishing materials. The product is aviation, aerospace materials technology in civil and outher fields.(train plate) Currently in China's construction sector to use 10 years, which reach 10 million square meters every year.

Today, aluminum honeycomb panel is mainly used in the construction of indoor and outdoor decoration, transportation, elevator industry, rail transportation and other related industries. The panel mainly use high quality 1100H24, 3003H24 alloy aluminum, 5052AH14 high manganese alloy aluminum as base material, panel thickness 0.8 ~ 1.5mm fluorocarbon roll coating board, floor thickness of 0.6 ~ 1.0mm, the total thickness of 8mm ~ 25mm is appropriate. Core material with a hexagonal 3003 aluminum honeycomb core, aluminum foil thickness of 0.04 ~ 0.06mm, side length of 5 ~ 6mm, used and modified epoxy polymer film, all closed dust-free operation, with automatic honeycomb composite panel production equipment high-temperature composite made by pressure.

To overcome the previous layer of honeycomb panel adhesive brittleness problem. The aluminum honeycomb panels in humid, hot cases, will not change, a kind of high-quality, lightweight, high-intensity appearance of luxurious rich and beautiful green decorative material.

Honeycomb Products advantages:

1. High strenth and light weight, carrying capacity, high flatness is not easy deformation. Aluminum honeycomb panel by a number of mutual containment of intense cellular composition, as if the numerous mini-beams can be scattered from the panel to withstand the pressure of the direction, so that even the force plate to ensure that the strength of its pressure and panels in the larger area formation to maintain a high degree of mouth, their standard weight is only 5kg/m2, thus greatly reducing the building's weight, which greatly improved the high-rise building interior and exterior decoration safety.

2. Energy-saving environmental protection, sound insulation, heat insulation, insulation, moisture, fire, wind pressure, seismic, good weather resistance. As the air layer between the panel was divided into closed-cell honeycomb core, heat and sound transmission, and were greatly limited in comparison with the other wall decoration materials, aluminum honeycomb board has better thermal insulation, sound insulation performance.

3. Easy to install and maintain strong plasticity. Whether it is inside the wall, the ceiling may be applicable, installation is simple and convenient, greatly accelerate the construction progress.

4. Cover coat color lasting, wind-based, anti-chemical corrosion, the new King promised each other in the use of quality assurance for 30 years the same color.

Aluminum honeycomb panel, in the past was restricted to the aviation sector in recent years, along with economic development, its use has gradually spread to civilian areas, such as high-grade architectural wall, meeting rooms, vehicles, vessels decorated wall panels, bulkhead and so on. Aluminum honeycomb panels are aluminum materials, panels, boards, honeycomb core, are using high-strength aluminum alloy, is the green environmental protection product, easy to recall the re-use, new building materials for future product trends.

Structure character:

1.Imported raw materials of strictly-controlled quality,updated fore-rolling coating with pre-baking finish process.

2.Option (fast colors)/PVDF/polyester surface finish.

3.Large dimensional panels (Max 5000mm×1500mm)

4.High strength,no reinforcement measure necessary (wind load greater than 8000N/M2 bearable).

5.Light weight:weight of 25mm-thickness honeycomb panel is 5.6kg/m2

6.Precise dimension and roller-pressing technology which ensure the high quality of the products.

7.Flatness surface makes installation easier and the fastcut the garment according to the figure productive way will ensure the quality of each piece of the products and minimize the waste of raw materials.

8.Perfect installation system which can eliminate the panel distortion caused by the temperature changes.Therefore the sealing against gas or water leakages will be ensured.The unique sealing installation system looks graceful in shape.Besides,it can effectively avoid the reduction of the life time of the sealing glues due to the direct radiation.

Furthermore,the lower installation requirements will allow the panels to be installed on various keels.

9.Excellent productive capability,irregular panels such as arc-shaped,folded and trapezoid panels will be designed and produced as per the special designing requirements.The non-plane irregular panels including arc shape,L shape,U shape are formed in one mold.