- Brand Name: Channel
- Temper: Other
- Place of Origin: Jiangsu China (Mainland)
- Alloy Or Not: Is Alloy
aluminum bar surface is smooth and bright
precision is high
Grade:1060 3003 6061 and so on
aluminum bar
aluminum alloy bar
Detailed Description
1. Standard
Producing and supplying the Aluminium Rod/aluminum bar/aluminum alloy bar according to Chinese standard GB/T3954-2001
American standard ASTM B233:1997,German DIN standard EN17152:1997.
2. Type,Condition and Range
Type | Condition | Range(mm) |
A | O | Φ9-20 |
A2 A4 A6 A8 | H/R |
3. Mechanical and Electrical Chracteristics
Type | Tensile Strength(Mpa) | Percentage of Elongation(%≥) | Max.Resistivity at 20oC(nΩ≤) |
A | 60-80 | 25 | 27.55 |
A2 | 80-110 | 12 | 27.85 |
A4 | 95-115 | 10 | 28.01 |
A6 | 110-130 | 8 | 28.01 |
A8 | 120-150 | 6 | 28.01 |
4. Components
Name of Element | Si | Fe | Cu | V+Ti+Mn+Cr | Other | Al |
Percentage | ≤0.11 | 0.25 | 0.01 | 0.02 | 0.03 | ≥99.6 |
Note:If the mechanical Characteristics and electric Characteristics of the Aluminium Rod are in accordance with the standard,the tests of chemical elements contained may not be included in the final inspection.
5. Deviation of Diameter
Diameter | Deviation | Max.Orality |
Φ9.0-12.0 | +0.5 | 0.9 |
Φ12.5-20 | +0.7 | 1.2 |
6. The Quality of Surface
(1).The surface of aluminum rod should be neat and well-distributed in dimension.
(2).The surface of aluminum rod should be clean without wrinkles,wrong roundness,cracks,impurity,twists and other defects affecting using,but slight mechanical scratches,little speckles,are permitled.
Note:Standard Specifications for Aluminum 1350 Drawing Stock for Electrical Purposes.
TABLE 1 Tensile Property Limits
Temper | Tensile Strength | |
Ksj | Mpa | |
1350-O | 8.5-14.0 | 59-97 |
1350-H12 and-H22 | 12.0-17.0 | 83-117 |
1350-H14 and-H24 | 15.0-20.0A | 103-138 |
1350-H16 and-H26 | 17.0-22.0A | 117-152 |
TABLE 2 Electrical Resistivity Limits
Temper | Max.Resistivity(Ω/MM2) | Min.Conductiuity of Equivalent Volume(% IACS) |
1350-O | 0.027899 | 61.8 |
1350-H12 and-H22 | 0.028035 | 61.5 |
1350-H14 and-H24 | 0.028080 | 61.4 |
1350-H16 and-H26 | 0.028126 | 61.3 |