Aluminum Conductor Alloy Reinforced(ACAR) For American Sizes

Detailed Product Description

-Conductor
This bare concentric-lay stranded conductor is made from round aluminum 1350-H19(extra hard) wires and round aluminum-alloy 6201-T81 core wires for use as overhead electrical conductors.These conductors are also manufactured as compact conductors if required.

-Standards / Testing Specications:
ASTM specications: B-230, B-398, B-524

-Installation
ACAR cable can be installed in air. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected by deciencies in the installation.

Aluminum Conductors, Aluminum-Clad Steel Reinforced(ACSR / AW)

Detailed Product Description

ACSR/AW

-Conductor:

Concentric stranded hard drawn aluminum wire

-Core:

Aluminum-Clad wire, solid or concentric stranded

-Application:

Used as bare overhead transmission and as primary and secondary distribution cable. ACSR/AW offers optimal strength for line design. Along with slightly greater ampacity and resistance to corrosion due to the aluminum cladding of the steel core wires.

It provides greater protection where corrosive condition are severe.

-Standards / Testing Specifications:

ACSR/AW are design according to international and recognized and accepted standard ASTM: B-230, B-549, B-498, B-500

-Installation:

It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected by deficiencies in the installation.

All Aluminium Conductors -AAC (Canadian Sizes)

Detailed Product Description

Canadian Sizes CSA C49-1965 

Bare Copper Conductor/Wire (BCC) BS 7884

Detailed Product Description

These are standard circular bare copper conductors mainly used for :

 1) Overhead transmission system

 2) Overhead traction system

 3)Transformer earthing (occasionally)

Norminal Cross Section Area(mm²) : 10,14,16,18,25,32(3),32(7),35,50(7),50(19),70(7),70(19),95,100,120,125,150(19),150(37),185(19),185(37)

 Other standards could also be supplied.