Honeycomb Material was born for Aviatic application in the beginning, and has been widely acknowledged for its unique stiffness-to-weight-ratio.

We succeeded in bringing it into commercial application.It is consist of an expanded 3003 alloy hexagonal aluminum honeycomb core in the middle,and a piece of 3003 H24 aluminum sheets bonded each side by Epoxy adhensive agent.

This sandwich structure gives this product high strength and super-flat surface.But as Aluminum honeycomb core has the advantage as Lightness, so it is very light in weight for transportation and installation.

The traditional thermal pressing equipments,not only in low working efficiency,but also will probably cause the panel to deform or bend due to the sudden change of temperature when panels come out.

Our updated Automatic Honeycomb Panel Composite Producing Lines produce the honeycomb panel with the following steps:

Feed in → Low Temperature → Middle Temperature → High Temperature → Middle Temperature → Low Temperature → Cooling and Figuration → Product out

This continuous and integrated producing progress is done in a completely sealed environment under high pressure.It efficiently avoids the problems before. The honeycomb panel by this producing procedure will never deform even if the application environment is damp or in high temperature.

Feature:

1.Light weight

2.High strength and stiffness

3.Super flat surface

4.Thermal insulation

5.Sound insulation

6.Fire resistance

7.Vibration Absorption

8.Corrosion Resistance

9.Easy fabrication and installation

10.Convenient maintainess

11.Can be recycled

Application:

1.Curtain wall for high buildling

2.Exterior cladding

3.Interior decoration

4.Marine (bulkhead,partition,ship body,countertop)

5.Rail (Floor,ceiling,interior)

6.Vehicle body

7.Elevator interior decoration

8.Bathroom and kitchen Partition

9.Industry equipment shell

10.Public facilities

11.Signs and advertising industry.

The magor characteristics of LQBOND Marble Honeycomb Panel:

1.Light weight.It weights only 16kg/m2,about the same weight as 6mm glass,and only 1/5 that of marble or granite in the same thickness.

2.Impact resistance:10 times more than 30 mm marble or granite.

3.1200×2400 mm large size panels and other dimensions are available.

4.The marble surface is according to customers choice.

5.In Acid Freeze-Thaw test,no change on bonding and surface after 45 circles in acid(-25∼50)

6.Easy installation with low cost.

7.Sound and thermal insulation.

8.Responsible price,only1/3 of imported similar products.

9.Bending Strength:8.5Mpa.

10.Comparession Strength:0.76Mpa.

11.Shearing Strength:0.48 Mpa.

12.Thickness Deviation:±0.5mm

13.Flatness Daviation: ±1m

14.Wind load:10KN/m2.

15.Airtight and watertight test results meet the standard of ASTM and AAMA.

16.Marble Honeycomb Panel can be easily fabricated into various requested shapes.

LQBOND Aluminum Honeycomb Panel is consist of 2 aluminum sheets and a aluminum honeycomb core.

By applying advanced aviatic producing technology and PVDF resin coating,LQBOND Aluminum Homeycomb Panel presents conventioal monotonous colours which are weathering-resistant,together with the characteristics of super-light and super-rigid.