Features

1 Various metal bases can be analyzed: ferrous metals of Fe, Co, Ni and Ti base, and non-ferrous metals of Cu, Al, Pb,Mg, Zn and Sn base

2 Adopting the exciting source with high reproducibility and stability. The exciting frequency can be changed in the range of 150-600Hz to match the material to be analyzed and get the best analytical results

3 Adopting highly integrated data collecting and controlling system with high automation

4 High-speed analysis with high antijamming ability, good reproducibility and stability

5 Reasonable design with more integrated construction

6 Windows based software with easy and simple operation

7 In-built data base allowing long-distance data transfer

8 Quality control diagram can be established automatically for easy quality control and monitoring

9 High vibration resistance ability. It's not necessary to make vibration resistance base

10 Partial thermostat system for fewer requirements to the environment

Specifications

Spark Source

Power supply: AC 220v ±10% 50 Hz

Input power: 1.0 kVA

Spectroscope

Spectral range: 175450 nm

Grating: 2400L/mm concave grating in radius of 0.75m; Blazed at 300nm (1st order); Ruled area: 30×50mm²; Reciprocal linear dispersion: 0.55nm/mm

Width of entrance slit: 20 µm

Width of exit slit: 50 µm, 75 μm

Maximum number of channel: 36

Constant temperature: 30±0.1

Measurement and control system

Measuring mode: sectional integration

Measuring reproducibility: RSD ≤ 0.2%

PMT high voltage power supplies: Voltage -1000v

Stability: better than0.5% (8 hours)

PMT high voltage adjustment: controlled by PC

Data Processing System

Industrial controlled built in PC, LCD display. Software: under Windows Operating system

Dimensions

Main Unit: 1500 (l) ×1100 (w) × 1200 (h) mm3

Area required: 15-20 square meters

Weight: about 450 kg

Laboratory requirements

Environment temperature:20 ±5°Crelative humidity:<70%

Purity of Argon gas: 99.999%

Power supply: AC 380V 10%, 50Hz, 3KW, 3-phase, 4-line

Ground lead: An independent ground lead should be used for the spectrometer itself. Grounding wire resistance< 2ohm