Activated Alumina

Detailed Product Description:

Place of Origin: Jiangxi China (Mainland)

Activated alumina has much micro-paths, so the specific surface is large. It can be used asabsorbent desiccant and catalyst.

Introduction:
Activated alumina has much micro-paths, so the specific surface is large. It can be used asabsorbent desiccant and catalyst carrier. It is also a kind of trace water desiccant and the pole-molecular absorbent, according to the absorbed molecular polarization, the attachment force is strong for water, oxide, acetic acid, alkali etc.
Activated alumina defluorinated just as the anion exchange resin, but the selectivity is much strong. The defluorination effect of the actived alumina is good. The capacity is stable, the absorbed fluorine is 6400g/cm3. It has high strength, low abrasion, no soften in water, no expansion, no powdery, no crack. It can widely used in the deep drying of cracked gas, ethylene and propylene, hydrogen-generation, air separation, instrument air drying and fluorine treatment for H2O2, also in the absorbing pollution material, such as H2S, SO2, HF and paraffin in the water gas, especially in the drinking water defluorination.

Physical Properties:

Item	Model	Al2O3 %	Chemical name	Size mm	Bulk density g/cm2	Surface area m2/g	Pore valume ml/g	Water adsorption %	Wear ratio %	Crushing strength N/pc
Activated Alumina Desiccant	WHA-101	≥93.5	α-β	Φ3-5	≥0.75	≥350	≥0.38	≥19	≤0.4	≥80
				Φ4-6	≥0.72	≥350	≥0.38	≥19	≤0.4	≥120
				Φ4-8	≥0.72	≥350	≥0.38	≥19	≤0.4	≥130
				Φ5-7	≥0.72	≥350	≥0.38	≥19	≤0.4	≥130
	WHA-102	≥93.5	α-β	Φ2-6	≥0.75	≥350	≥0.40	≥20	≤0.6	≥80
	WHA-102	≥93.5	α-β	Φ5-7	≥0.72	≥350	≥0.40	≥19	≤0.6	≥120
Activated Alumina Defluoridizer	WHA-104	≥92	α-β	Φ2-3	≥0.74	≥350	≥0.38	≥20	≤0.4	≥45
				Φ1-2.5	≥0.74	≥350	≥0.38	≥19	≤0.4	≥38
				Φ0.5-2	≥0.74	≥350	≥0.38	≥19	≤0.4	≥20
Sulfur Recovery Catalyst	WHA-201	≥92	α-β	Φ4-6	≥0.70	≥350	0.4-0.5	≥20	≤0.35	125

Related Products