chlorinated rubber aluminum powder antirust paint

Composition:This paint is made of chlorinated rubber, antirust pigment, plasticizer, additiv-e

                   and solvent.

Characteristic:The permeability is low when the paint meets the oxygen and the steam. It is

                     water-resistant, durable and anti-corrosion. It can work in low temperature and

                     enjoys good adhension.

Use:It can prevent the bottom of the ship and the water line from the rust. It can be us-ed as

       the intermediate coat paint and the anticorrosion primer of the steel structure.

Basic Standard

     Item                                    Standard
1.Colour:                                    all colors
2.Mixing ratio:                        one component
3.Solid content:                            50%
4.Specific gravity:                        1.25
5.Thickness:                          dry film: 20~40μm/layer    
                                             wet film: 45~75μm/layer
6.Coating rate:                        theoretical dose: 6.8 /litre/30μm
                                             actual value: It is related to the surface treatment,

                                             environment and way of construction.
7.Storage temperature:                10~40
8.Storage period                         one year
9.Flash point                              above 23

Construction data

1.way of painting:                     spraying, brush painting(roller coating under 23)
2.Spray pressure:                    0.3~0.6Mpa
3.Dilution rate:                         0~5%volume ratio
4.Diluent:                                 special diluent
5.Construction temperature:   10~50
6.Drying time & temperature    5   10   20   30
7.Interval of the painting 
   dry finger touchmin      60   45   30   15
   Min interval of the painting  24   20   18   16
8.Matching paint: TH 77primer, chlorinated rubber primer and intermediate coat of various

   colous
9.Surface treatment: Wash away the water soluble dirt and the salt. Degrease according to the

   cleaning standards of SSPCSP1 solvent.
   Remove the burr and thecrack. Make it smooth. Remove the rust and the oxcide scale by

   sand blasting so that it can reach the standard  of       ISOSa2.5 ( SSPCSP10 )or use the

   electric tool to reach the standard of ISOSt3.