Aluminum Composite Plastic Panel Protective Film Adhesive Tapes is developed Polyethylene film, easy to clean, nontoxic, widely used in protecting the surface of home appliance, electronic equipments, computer, communication equipments as well as many other various products. The PE protective film can protect products away from miscellaneous kinds of pollution, contamination, scratch, dirt&dust, damage, during the process of storage and transport. Also, the protective film can be easily applied and torn off without any residue glue on the surface on the protected products. These features make the PE protective film to be a high effective and low cost way in protecting most kinds of valued products.  

 

DIMENSIONS:

1) Thickness: 0.03-0.3mm

2) Width: 50-1280mm

3) Length: 100-1000m

4) Color: transparent with no color (blue, white, black, black and white
and other colors also available)

5) Backing: polyethylene

6Adhesive rate: depending on products' surface

Adhesive specifications:

Product	Adhesion g/25mm	Property and Application
A	25-75	Low adhesion,suitable to protection of polished stainless steel plate and instruments,meter,display screen,etc.
B	75-125	Low-medium adhesion,suitable to protection of polished stainless steel plate,Ti metal plate and instruments,meters,display screens,etc.
C	125-175	Mediu adhesion,suitable to protection of fine-grained ground stainless steel plate, plastic sheet,etc.
D	175-225	High-medium adhesion,suitable to protection of coarse-grained ground steel plate plastic-Al plates,etc.
E	225-270	High adhesion,suitable t protection of Al-plastic plates with fine texture,plastic sheet with coarse texture,etc.
F	270-MAX	Sub-super high adhesion,suitable to protection of Al-plastic plates with fine texture,plastic sheet with coarse texture,etc.

SAFETY / ENVIROMENTAL INFORMATION :

MSDS Class	SEMI HAZARD Ratings
Health	Minimal
Fire	Slight
Reactivity	Moderate
VOC	Serious
CONEG	Extreme

Feature:

1) Stable adhering capacity
2) Special easy-peel
3) Leaving no residue glue or trace on the target surfaces
4) Protect the surfaces not to be polluted, corrode, and scratch during the process
of produce, transport, store and installation 

5) Water-based acrylic pressure-sensitive adhesive offering environment-friendly due to no organic solvents being used from the manufacturing stage.

6) Excellent flexibility offers good wettability to the surface.

7) Adhesive strength only increases slightly as time elapses, which facilities peeling.

8) Offering superior adhesion, no contamination adhesive and ghosting after peeling off.

9) Offering easy application and peeling. In any climate, the ability to apply smoothly without wrinkles or air bubbles.

specifications:
1)excellent performance of anti-hight tenperature:our film neither cracks nor yellows, even when exposed to direct sunlight. It keeps its transparency and preserves aesthetic beauty.our pe film can be dilacerated easily without remaining trails after exposured in the 70oven for continuate 48 hours.
2)excellent performance of anti-low tenperature:our pe film can be dilacerated easily without remaining trails after expousured in the -40 oven for 6 hours.
3)excellent performance of absorption of UV ray:our pe film can be dilacerated easily without remaining trails after expousured in 300w uv or infrared light within 20cm for 48 hours.It protects the displays from getting damaged by UV rays.
This series of protective film can help prevent surface from being damaged during transportation.Our film is available in a wide range of size,and possible to select different types as the users's requirement.
We will provide consumers with first class quality and perfect service.

Test items and results:

Appearance test
Test method	Appearance requirement	Actual performance	Conclusion
Estimated by eye	Smooth surface, dry, no perforationfleck and impurity, no residue transfer	NORMAL	OK
Product specification test items
Item	Demand numbers	Actual numbers	Conclusion
Width (m)	1.00±3	1.00±2	OK
Length (m)	≥1000	1000	OK
Thickness (mm)	0.05±0.005	0.046-0.052	OK
Weight (kg)	Each coil ±5%	-------	-----
Inner diameter of tube (mm)	76±2	77	OK
Physical property test index
item	Demand numbers	Actual numbers	Conclusion
180ºPeel-off strength, N/25mm	0.8-1.6	0.85-1.46	OK
tensile strength, N/25mm	≥20	21.5-22.6	OK
Rupture elongation rate,%	≥150	150-250	OK
Heat resistance	6048 hours no residue on target after get back to room temperature	No residue	OK
Physical reaction with target (7 days in normal temperature)	no residue on target	no residue, no chemical reaction	OK