Name	type	phase		Character uses
		main phase	sub main phase
CA70-E	Early strength	CA	CA2 α-Al2O3	1.Without any additives 2.Suitable to formulate the high pure refractory castables,low cement and ultra low cement castables. 3.Early Strength 4.Suitable for use in Winter(LCC & ULCC).
CA70-G	General	CA CA2	α-Al2O3	1.Without any additives 2.Suitable to formulate all kinds of refractory castables,LCC&ULCC. 3.With high strength
CA70-A	additives	CA CA2	α-Al2O3	1.Containing a little of additives 2.Good flowability 3.Long working time 4.Suitable for use in Summer
CA80-E	Early strength	CA α-Al2O3	CA2	1.Without any additives 2.Early strength 3.Suitable to formulate castables,LCC&ULCC. 4.Suitable for use in Winter
CA80-G	General	CA CA2 α-Al2O3		1.Without any additives 2.Suitable to formulate castables,LCC&ULC. 3.With high temperature-resistant properties.
CA80-A	addities	CA CA2 α-Al2O3		1.Containing a little of additives 2.Good flowability 3.Long working time 4.Suitable for use in Summer
CA-75E CA-75G CA-75A				·CA-75,G,A are the products between CA-70E,G,A and CA-80E,G,A
CA-65P				·The Aluminate Cement contains approimately 65% of Al2O3,It is produced depending on the requirement of customers.

Products quality

		GB201-2000 CA-70	CA-70E	CA-70G	CA-70A	CA-75E	CA-75G	CA-75A	GB201-2000 CA-80	CA-80E	CA-80G	CA-80A
Chemical composition
Al2O3 SiO2 Fe2O3 R2O3 S Cl	%	≥68,≤77 ≤1.0 ≤0.7 ≤0.4 (≤0.1) (≤0.1)	≥68,≤77 ≤1.0 ≤0.7 ≤0.4 (≤0.1) (≤0.1)			∼75 ≤1.0 ≤0.7 ≤0.4 (≤0.1) (≤0.1)			≥77 ≤0.5 ≤0.5 ≤0.4 (≤0.1) (≤0.1)	≥77 ≤0.5 ≤0.5 ≤0.4 (≤0.1) (≤0.1)
Physical properties
fineness	% m2/kg	(20) 300	(20) 600			(20) 600			(20) 300	(20) 650	(20) 650	(20) 650
0.045 residue Blaine
setting time		≥30 ≤6	≥30** ≤6			≥30** ≤6			≥30 ≤6	≥30 ≤6	≥30 ≤6	**
initial final	h min
Flexural	Mpa	- 5.0 6.0	3.0 5.5 6.5	- 5.0 6.0	- 5.5 6.5	3.0 5.0 6.0	- 5.0 6.0	- 5.0 6.0	- 4.0 5.0	3.0 4.5 5.5	- 4.0 5.0	- 4.5 5.5
6h 1d 3d
Compressive
6h 1d 3d	Mpa	- 30 40	15 40 50	- 30 40	- 40 50	15 35 45	- 30 40	- 35 45	- 25 30	10 30 40	- 25 30	- 30 40

*According with the regulations of GB201-2000,we should offer the report of S,Cl contents and the residue when the customer requires or the buyer and seller have related agreement.
**Setting data can not be offered for those cement with additives which are made accoding to customers'requirement.
Testing method
Chemical Composition:According with GB/T205
Blaine:According with GB/T8074
Fineness:According with GB/T1345,but the sieve pore size should be changed to 0.045.
Setting time:According with the addenda A of GB/TGB201-2000
Strength:According with the amendment prescribe of GB/T17671 and GB201-2000
Packing
20kg or 25kg in PE bag with a complex bag of woven plastic and kraft paper outside.Other kind of bags can be supplied according with the agreements of the buyer and the seller.
Note:Prevent humidity during storage and transportation.Don't mix with other variety of cements.