NOTE: 1. The chemical composation is calculated on dry basis removed the adhesive moisture(except the loss on ignition). 2. The round-off number rule is stipulate as 5.2 of GB1250, and the rounded digit shall be consistant with the limiting values listed in the forms. 3. Normally, NaF/AlF3 ratio is between 1.8-2.9,any special requirements should be indicated in the contract. 4. Any requirements on the loss on igniton below 2.5% should be indicated in the contract.
PROPERTIES
High Molecular Ratio
1. 4kinds of particle size are classified as follows: (a)The Granular:1 - 10mm (b)The Sandy:0.074-1mm(16 - 200mesh) (c)The Powder:≤0.25mm(60mesh) (d)The mixture of the above (a),(b),(c)
2. Colour: Grey-white, light-yellow,light-red The chemical compositions of the product keepstable no matter how it differs in colour and particle size.
Low Molecular Ratio
1. Colour:white powder 2. particle size: (a)The granulars with the size>4mm may be allowed, but their content can not be more than 5%. (b)-300 meth≥70%.
Packing: In plastic coating woven bags with plastic fiim and paper bags inside, 40 kgs, 50kgs or 1000kgs net each, or as the requirement of clients.