Jinan Amachine Machinery Co., LTD

www.cnamachine.com/en

Single axis CNC rolling machine GYJ-CNC-02 (6WD)

(Single axis CNC tenning machine)

Processing method:

Profiles with teeth made and strips inserted---to roll and to achieve tightness of profiles.

Function:(Product after feeding---rolling tightly)

1. Special equipment manufactured for thermal barrier aluminum profile. Crimping of aluminum profiles for thermal break at the dedicated section to obtain a thermal break profile uses 6 pairs’ rolling-discs. It is used to press and fasten the profile with thermal barrier strips.
2. Adopts three sets of roller to roll the combination of strip and aluminum profile tightly.

1st unit: guiding and pre-crimping

2nd unit: main crimping force applied

3rd unit: crimping and correction (horizontally and vertically)

Features:

1. 6 synchronous driven discs, stepless speed regulation through the frequency converter.
2. Value of pressure and vertical height of three sets (six pairs or 12 pieces) rolling-discs is showed clearly.
3. Units 1 and 2 adjustable for horizontal width.
4. Units 3 fully horizontal, vertical and wide adjustment (for straightness correction of assembled section)
5. 4 lower "Vulkollan"-surfaced horizontal rollers, height - adjustable (φ85, L = 120 [mm])
6. 4 upper "Vulkollan"-surfaced horizontal rollers, electric height adjustment, (φ85, L = 120 [mm])
7. The whole height of all three sets (six pairs or 12 pieces) rolling-discs can be adjusted by CNC that depends on the aluminum profiles.
8. When rolling different aluminum profiles, measuring value of height that aluminum profiles are rolled first, and imputing the value to the computer to adjust the rolling - discs to the place with high accuracy and speed by CNC.

Technical data:

Power supply: 380V/50Hz

Total power: 4.73Kw

Rolling-disc diameter: 240mm

The whole height of three sets rolling-discs: 0-80mm

Max processing size of profile: W*H=230mm*230mm

Overall dimension: L*W*H=1800mm*1050mm*1650mm

Weight: 1500Kg